“[WiMAX] could potentially be the biggest thing since the Internet itself,” as Sriram Viswanathan, general manager of Intel’s Worldwide Interoperability for Microwave Access (WiMAX) program office, once stated. That is quite a bold statement and underscores the sentiment of many WiMAX proponents. But as the WiMAX industry has grown, so has WiMAX hype and confusion.
The IEEE originally formed the IEEE 802.16 working group in 1998 to provide a standard for wireless metropolitan area networks. The primary application was for high-speed fiber access solutions using high-frequency line-of-sight (LOS) fixed wireless connections. The original standard was referred to as 802.16 and evolved to support fixed broadband wireless access over lower-frequency non-line-of-sight (NLOS) wireless connections. The evolved standard, 802.16-2004, is often referred to as fixed WiMAX.
Once the 802.16-2004 standard was complete, the IEEE committee began work to further evolve the standard to support mobile applications. Mobile communication is more complex than fixed communication. The technology must be able to hand off a wireless connection from one base station to another while the user is moving, without dropping the connection. The new 802.16e-2005 standard was completed in December 2005 and not only supports mobile applications but also nomadic and fixed applications. 802.16e-2005 is often referred to as mobile WiMAX.
The fixed/mobile WiMAX PHY layer uses a technology called orthogonal frequency division multiplexing (OFDM). OFDM techniques have been around for decades. The technology is now commonplace in wireless systems such as Wi-Fi. OFDM evolved from earlier single-carrier modulation systems and frequency division multiplexing systems. OFDM is a type of frequency division multiplexing system that provides better channel throughput because all of the underlying sub-carriers are orthogonal to one another.
Media access control layer
The primary job of the MAC layer is to provide an interface between the PHY layer and upper layer protocols. Each instance of the MAC layer in a fixed/mobile WiMAX station has a 48-bit address as defined by the IEEE Std 802. Unlike the distributed and connectionless 802.11 MAC, the WiMAX MAC is centralized and connection-oriented. A 16-bit connection identifier (CID) identifies each WiMAX connection. Each WiMAX MAC layer protocol data unit uses the CID, instead of the MAC address, to identify source and destination. WiMAX has a rich quality of service mechanism that is based on the Data Over Cable Service Interface Specifications (DOCSIS).
At the most basic level, WiMAX supports mobile, fixed and nomadic wireless applications. A mobile application provides communication while the user is in transit. A good example is a business traveler who communicates while on a train. The Sprint Xohm service — to be launched in spring 2008 — will provide Internet access while moving at high speeds using WiMAX technology. It will compete with 3G technologies like EV-DO (from Verizon Wireless) and HSDPA (from AT&T).
Fixed wireless applications often provide last-mile connections in rural or underdeveloped areas that do not have Digital Subscriber Line (DSL), Hybrid Fiber-Coax (HFC), or other last-mile wired infrastructure. Enterprises can either purchase fixed WiMAX technology for use in their own private network (e.g., a point-to-point wireless connection between two buildings) or can purchase fixed WiMAX service from a wireless Internet service provider (WISP). Towerstream is an example of a WISP that provides fixed, high-speed WiMAX access for business users in many urban areas.
Finally, a nomadic application is one where a user moves from location to location but communicates only while stationary. A good example is a repairman who needs high-speed network access while parked at a customer location but not while driving. The WiMAX service from Clearwire can be used for nomadic (and fixed) applications.